Here are some videos showing how we use a test stand in our shop to test engines when we do not have the Banshee frame or roller to reinstall the engine into. To see the rest of the videos in the YouTube playlist about the test stand, scroll down and click on "Watch Full List on YouTube."
Before you ask... we also provide directions to customers with an engine build showing them what type of gas to run, gas to oil mix ratio, how they need to finish breaking in their engine build and how to do a plug chop. We get the carb jetting close to where we think it will need to be. After the plug chop, we ask customers to share a picture of the plugs with us so we can recommend the best jetting for their elevation. Click here for a little more info on breaking in your Banshee engine.